|
| |
TM 9-2320-360-34-1
17-3. WINCH PLATFORM REPLACEMENT (CONT)
(10)
Install two cushion clips (17) and brackets
(17.1) on left wire harness (18) and winch
platform (5) with four screws (19) and new
locknuts (20).
(10.1)
Install coalescing filter (20.1) on winch
platform (5) with two screws (20.2) and
new locknuts (20.3).
(11)
Install pogo stick assembly (21) on winch
platform (5) with two screws (22) and new
locknuts (23) with aid of assistant. Torque
to 110 Ib-ft (149 Nm).
c.
Follow-On Maintenance
(1)
Install decontamination unit (TM 9-2320-360-20).
(2)
Install control console (para 17-7).
(3)
Install winches (para 17-2).
(4)
Install hydraulic pump (para 17-11).
(5)
Install arctic kit battery box (if equipped) (TM 9-2320-360-20).
(6)
Install hydraulic reservoir (TM 9-2320-360-20).
(7)
Install auxiliary winch (TM 9-2320-360-20).
(8)
Install winch return manifold (TM 9-2320-360-20).
(9)
Install winch return hose (TM 9-2320-360-20).
(10)
Install catwalk (TM 9-2320-360-20).
(11)
Install winch ladder (TM 9-2320-360-20).
(12)
Install reflectors (TM 9-2320-360-20).
(13)
Install clearance lights (TM 9-2320-360-20).
(14)
Install tail pipe assembly support (TM 9-2320-360-20).
(15)
Install right rear fender (TM 9-2320-360-20).
(16)
Install left rear fender (TM 9-2320-360-20).
(17)
Install exhaust heat shield (TM 9-2320-360-20).
(18)
Push in battery box (TM 9-2320-360-10).
17-12 Change 2
|
