|
| |
TM 9-2320-360-34-1
17-3. WINCH PLATFORM REPLACEMENT (CONT)
(3)
Remove four locknuts (6), screws (7), two
brackets (7.1), two cushion clips (8), and
left wire harness (9) from winch platform
(4). Discard locknuts.
(3.1)
Remove two locknuts (9.1), screws (9.2),
and coalescing filter assembly (9.3) from
winch platform (4). Discard locknuts.
(3.2)
Remove hose no. 2001 (9.4) and hose
no. 20 (9.5) from bulkhead fitting (9.6).
(3.3)
Remove nut (9.7) and bulkhead fitting
(9.6) from winch platform (4).
(4)
Remove locknut (10), screw (11), and
cushion clip (12) from right wire harness
(13). Discard locknut.
(5)
Pull air hose no. 2762 (14), wire harness
(13), and grommet (15) through winch
platform (4).
17-8
|
