|
| |
TM 9-2320-360-34-1
(11) Install two new lockwashers (15) and nuts (16)
on studs (17). Torque to 25 lb-ft (34 Nm).
(12) Install two new lockwashers (18) and screws
(19) on air spring (13) and suspension arm (2).
Torque to 50 lb-ft (68 Nm).
(13)
Install air line (20) on fitting (21).
c. Follow-On Maintenance
(1) Install shock absorber (axle no. 2 and axle no.
3 only) (TM 9-2320-360-20).
(2) Install wheel/tire (TM 9-2320-360-20).
(3) Start engine (TM 9-2320-360-10).
(4) Build air pressure to 120-125 psi (827-862 kPa)
(TM 9-2320-360-10).
(5) Shut off engine (TM 9-2320-360-10).
(6) Check air springs for leaks.
15-23 (15-24 blank)
|
