|
| |
TM9-2320-360-20-3
Section 4
TROUBLESHOOTING CHARTS
D. CHART -6 - “CHECK GAUGES” LIGHT ON AND NO ACTlVE CODE ON DDR (Cont’d)
STEP/SEQUENCE
RESULT
WHAT TO DO NEXT
C 6-30
Verify Repairs
l
l
l
l
l
l
Turn ignition off.
Reconnect all connectors.
Turn ignition on.
Clear codes.
Turn ignition off.
Turn ignition on while at same
time observing “Check Gauges”
light.
Repairs are complete.
"Check Gauges"
light comes on for
up to 5 seconds
then goes out.
"Check Gauges"
light come on
and stays on.
All system diagnostics are
complete. Please review this
section from the first step to find
error.
H-77
|
