|
| |
TM 9-2320-356-BD
Limitations:
o None
Personnel/Time Required:
Materials/Tools:
o 1 soldier
o 30-60 minutes
Other Options:
0
0
0
O
0
0
0
0
0
0
0
0
Rubber sheet (tire inner
tube or similar material)
Tape
Wire
Rubber hose
Hose clamps
Sealant
Metal tubing (mirror arms, old
hydraulic line, or similar
material)
Thin sheet metal (coffee can
or similar material)
Shell casing, 5.56 mm or 7.62 mm
Aluminum can
Nonhardening sealer
Epoxy
o Seal the crack with epoxy.
Procedural Steps:
Option 1:
Damaged Rubber Hose.
1.
Cut out damaged portion of hose.
2.
Cut a piece of metal tubing longer than the section removed. If tubing is not
available, cut the ends from a 5.56 or 7.62 mm shell casing.
4.
Insert the metal tubing into the hose ends.
5.
Clamp the hose ends with hose clamp or wrap tightly with wire and twist the
wire ends together.
6.
Record the BDAR action taken.
When the mission is completed, as soon as
practicable,
repair using standard maintenance procedures.
6-10
|
