|
| |
TM 9-2320-356-BD
Option 5:
Flare Tube Coupling.
NOTE
Make sure the flaring kit is for 37-degree JIC
f i t t i n g s .
1.
Cut damaged area from tubing.
2.
Square off tubing ends.
3.
Install the coupling nuts on the tube.
4.
Flare both ends of tubing and connect tubing ends.
5.
If the tube is too short to be coupled, flare a short piece of tubing on one
end.
Add the coupling nuts and flare the remaining end.
6.
Connect the two couplings.
7.
Operate the system and check for leaks.
8.
Record the BDAR action taken.
When the mission is completed, as soon as
practicable, repair using standard maintenance procedures.
3-26
|
