|
| |
TM 9-2320-356-BD
Option 2:
Repair of Small Crack or Hole.
1.
Remove paint from around the area where metal plate is to be positioned.
2.
Cover the area with a plate from any available metal large enough to cover the
crack or hole.
3.
Seal the edges of the plate with quick-drying epoxy.
4.
Allow epoxy to harden before running engine.
Use heat to speed up curing the
epoxy.
5.
Record the BDAR action taken.
When the mission is completed, as soon as
practicable,
repair using standard maintenance procedures.
Option 3:
Repair of Small Crack or Hole.
1.
Clean damaged area.
2.
Fill small crack or holes in low-stress area either with harden
fiberglass, or epoxy.
3.
Allow filler to harden before running engine.
ing sealer,
4.
Record the BDAR action taken.
When the mission is completed, as soon as
practicable, repair using standard maintenance procedures.
3-9
|
