|
| |
TM 9-2320-356-BD
Limitations:
o Reduced vehicle speed
Personnel/Time Required:
o 1-2 soldiers
o 2-6 hours
Materials/Tools:
o Epoxy
o Copper wire
o Hardening gasket sealer
o Sandpaper or emery cloth
Other Options:
o Continue operations.
Procedural Steps:
Option 1:
Gasket Sealer.
1.
Remove cylinder head.
2.
Locate leaking area.
3.
Liberally coat leaking area with hardening gasket sealer.
4.
Replace cylinder head and tighten mounting bolts or studs.
5.
Check engine operation.
6.
Record the BDAR action taken.
When the mission is completed, as soon as
practicable, repair using standard maintenance procedures.
Option 2:
Wire and Sealer.
1.
Remove cylinder head.
2.
Remove damaged gasket or O-rings.
3.
Clean the head and the engine head surface with sandpaper or emery cloth.
4.
Lay soft copper wire around each cylinder bore and trim to eliminate any
overlap.
5.
Install old gasket coated with gasket sealer, varnish, or paint.
6.
Install cylinder head and tighten mounting bolts or studs.
7.
Record the BDAR action taken.
When the mission is completed, as soon as
practicable, repair using standard maintenance procedures.
3-4
|
