|
| |
TM 9-2320-356-BD
3.
When the damaged area is covered, twist the ends of the wire counterclockwise.
Tighten the twist to remove slack.
4.
Twist with pliers to tighten coils.
5.
Pry the twist to tighten coils even more.
6.
Repeat twist for secureness.
7.
Cut off ends and bend twisted portion down against rope.
TWIST PORTION
NEAR MIDDLE
WRAP WITH SMALL
TWIST ENDS TOGETHER
WIRES
COUNTERCLOCKWISE
TIGHTEN TWIST WITH
PLIERS
PRY TWIST TO TIGHTEN
REPEAT TWIST
8.
Record the BDAR
practicable, repair
CUT OFF ENDS
BEND TWISTED PORTION
DOWN AGAINST ROPE
action taken.
When the mission is completed, as soon as
using standard maintenance procedures.
Option 2:
Rolled-In Eye Splices.
1.
Bend the rope from the end at a distance equal to the length of loop desired,
plus an additional length approximately 10 times the rope diameter. Split the rope
by separating three adjacent strands,
leaving the other strands and core intact.
14-14
|
