 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-312-24-2
Truck Engine
Disassembly and Assembly Section
g00771192
g00618473
Illustration 255
Illustration 257
Typical example
2. Remove bolt (2) and idler pulley (3).
(1) Inlet air temperature sensor
(2) Electrical connection for inlet air temperature sensor
i01748107
1. Install inlet air temperature sensor (1). Tighten
Idler Pulley - Disassemble
the inlet air temperature sensor to a torque of
20 5 Nm (15 4 lb ft).
SMCS Code: 1358-015
2. Connect plug (2) for inlet air temperature sensor
(1).
Disassembly Procedure
Table 47
i01161409
Required Tools
Idler Pulley - Remove
Part
Tool
Part Description
Qty
Number
SMCS Code: 1358-011
1P-0510 Driver Group
A
1
Removal Procedure
1
1P-1855 Retaining Ring Pliers
B
Start By:
a. Remove the idler pulley. Refer to Disassembly
and Assembly, "Idler Pulley - Remove".
g00618468
Illustration 256
1. Remove cover (1) from the idler pulley. Cover (1)
will be damaged during removal.
g00618635
Illustration 258
1. Remove spacer (1) and bolt (5) from idler pulley
(4).
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals