Exhaust Particulate Filter

TM 9-2320-312-24-2

Truck Engine

Disassembly and Assembly Section

g. When you install the filter module new gaskets

4. Install filter module(3)next to catalyst module (2).

should be used. The filter module should be

installed in the opposite direction. Refer to

5. Secure filter module (3) to catalyst module (2)

the identification marks that are on the filter.

with gasket (8) and clamp (7).

The inlet side of filter should now be outlet

side of the filter.

h. Tighten the clamps to a torque of 20 Nm

(15 lb ft).

i01806385

Exhaust Particulate Filter -

Assemble

SMCS Code: 1091-016

Assembly Procedure

g00880169

Illustration 67

1. The Diesel Particulate Filter (DPF) is divided into

6. Install catalyst module (2) next to inlet module

four sections. Each section is secured to the

(1).

previous section with a clamp and a gasket.

7. Secure catalyst module (2) to inlet module (1)

with gasket (6) and clamp (5).

g00880179

Illustration 65

2. Install outlet module (4) next to filter module (3).

g00880160

Illustration 68

(1)

Inlet module

3. Secure outlet module (4) to filter module (3) with

(2)

Catalyst module

gasket (10) and clamp (9).

(3)

Filter module

(4)

Outlet module

8. Tighten the clamps to a torque of 20 Nm

(15 lb ft).

g00880176

Illustration 66