 |
|||
|
|
|||
|
Page Title:
Injection Actuation Pressure Control Valve - Install |
|
||
| ||||||||||
|
|
 TM 9-2320-312-24-2
Truck Engine
Disassembly and Assembly Section
g00763009
g00762946
Illustration 41
Illustration 42
(4) Solenoid valve
1. Use Tool (A) in order to install the injection
(5) Spacer
(6) Nut
actuation pressure control valve on the unit
injector hydraulic pump. Tighten the injection
1. Clean the injection actuation pressure control
actuation pressure control valve (1) to a torque
valve and the components for the injection
of 50 5 Nm (37 4 lb ft).
actuation pressure control valve.
2. Install new O-ring seals (3) and (2), and backup
on the injection actuation pressure control valve
ring (1) on the injection actuation pressure
(1). Tighten nut (3) to a torque of 5.5 1.5 Nm
control valve. Lubricate the O-ring seals with
(49 13 lb in).
clean engine oil.
3. Reconnect wiring harness plug (2) to the
injection actuation pressure control valve (1).
i01406008
Injection Actuation Pressure
i01477891
Control Valve - Install
Unit Injector Hydraulic Pump -
Remove
SMCS Code: 5051-012
SMCS Code: 1714-011
Installation Procedure
Removal Procedure
Table 9
Required Tools
Table 10
Tool
Part Number
Part Description
Qty
Required Tools
1
5P-0333
A
Crowfoot Wrench
Part
Tool
Part Description
Qty
Number
NOTICE
5P-0327
A
1
Crowfoot Wrench
Keep all parts clean from contaminants.
1
180-0186
B
Removal Tool
Contaminants may cause rapid wear and shortened
component life.
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened
component life.
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals