Test Step 9. Route the Supply Bypass Wires to the Remote Accelerator Pedal Position Sensor

372

TM 9-2320-312-24-2

Troubleshooting Section

g00642019

Illustration 166

(1) Mounting screw holes

(3) Sensor housing

(5) Accelerator pedal assembly

(2) Sensor slot

(4) Mounting surface for sensor

(6) Accelerator block assembly

Not OK The remote accelerator position sensor

Expected Result:

is faulty. Check the accelerator pedal assembly

When the sensor is removed from the accelerator

in order to ensure that the accelerator pedal

pedal assembly and the sensor slot is released, the

assembly is not causing damage to the sensor.

duty cycle is 10 percent or less. When the sensor

If the accelerator pedal assembly is causing

slot is moved to the maximum position, the duty

damage to the sensor, refer to the OEM dealer

cycle increases to 90 percent or more.

for correct replacement of the accelerator pedal

assembly. STOP.

Results:

Test Step 9. Route the Supply Bypass

Wires to the Remote Accelerator Pedal

OK The remote accelerator position sensor is

Position Sensor

working correctly. Clear any diagnostic codes that

were caused by performing this test procedure.

Refer to the OEM dealer for correct replacement

A. Turn the ignition key switch to the OFF position.

of the accelerator pedal assembly. STOP.