Test Step 1. Check the Programming of the Dedicated PTO Customer Parameter

354

TM 9-2320-312-24-2

Troubleshooting Section

g00644427

Illustration 153

This illustration is for the schematic for "remote switches" for "PTO configuration".

g00644448

Illustration 154

This illustration is for the schematic for "remote throttle" for "PTO configuration".

Test Step 1. Check the Programming of

Expected Result:

the Dedicated PTO Customer Parameter.

The "PTO Configuration" is programmed to "Cab

Switches", "Remote Switches", or "Remote Throttle".

A. Connect ET to the cab data link connector.

Results:

B. Turn the ignition key switch to the ON position.

Yes Proceed to Test Step 2.

C. Access the Dedicated PTO Customer

Parameters on ET. Note the programming of the

PTO Configuration Parameter.