 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-312-24-1
FRONT SPRINGS REPLACEMENT - CONTINUED
0144 00
INSTALLATION - CONTINUED
4.
Using floor jack, raise front axle assembly (5) sufficiently to align spring (1) with mounting locations at front and rear of
spring.
5.
At front of spring (1), install spring to frame with bolt (9) and nut (10). DO NOT fully tighten nut.
6.
At rear of spring (1), install spacer (13), bolt (11), and nut (14) to spring hanger (12). DO NOT fully tighten nut.
9
1
14
13
1
12
11
10
7.
Position spring cap (2) and two U-bolts (4) at spring (1), with U-bolts passed through lower mounting bracket (8).
8.
Lower floor jack to place weight on spring (1).
9.
Install four washers (7) and nuts (6) on two U-bolts (4). Tighten U-bolt nuts to 450 lb-ft (610 Nm).
10.
At front of spring (1), tighten nut (10) to 975 lb-ft (1322 Nm).
11.
At rear of spring (1), tighten nut (14) to 120 lb-ft (163 Nm).
12.
Install wheel and tire assembly (TM 9-2320-312-10).
13.
Remove jackstands from front bumper and lower vehicle to the ground. Remove floor jack from under front axle.
14.
Tighten wheel and tire assembly lug nuts to 500 lb-ft (678 Nm), using appropriate tightening pattern (TM 9-2320-312-
10).
15.
Connect shock absorber to lower mounting bracket (WP 0032 00).
END OF WORK PACKAGE
0144 00-5/6 Blank
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals