 |
|||
|
|
|||
|
Page Title:
PUMP-TO-TILT CYLINDER HOSES REMOVAL - CONTINUED |
|
||
| ||||||||||
|
|
 TM 9-2320-312-24-1
CAB TILT HYDRAULIC HOSES AND FITTINGS REPLACEMENT - CONTINUED
0126 00
PUMP-TO-TILT CYLINDER HOSES REMOVAL - CONTINUED
3.
Trace hoses (4 and 5) to cylinder (6). Pay close attention to how hose is routed. Remove all tiedown straps and discard.
NOTE
Cab tilt latch hose is released along with hoses (4 and 5), at clamp location closest to cab tilt cylinder.
4.
Remove four locknuts (8), clamps (10), and release hoses (4 and 5) from welded studs (9) on frame rail. Discard lock-
nuts.
5.
At cylinder (6), disconnect hose (4) from elbow (7) at pull port of cylinder. Disconnect hose (5) from elbow (11) at push
port. Remove hoses from vehicle.
6.
If damaged, remove elbow (7) from cylinder (6) and elbow (11) from tee (12).
PULL
6
PORT
7
4
PUSH
PORT
12
8,9
11
5
CAB TILT LATCH HOSE
10
0126 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals