 |
|||
|
|
|||
|
Page Title:
12V ELECTRICAL CONNECTOR REPLACEMENT |
|
||
| ||||||||||
|
|
 TM 9-2320-312-24-1
TRAILER ELECTRICAL CONNECTORS REPLACEMENT - CONTINUED
0113 00
12V ELECTRICAL CONNECTOR REPLACEMENT
NOTE
Perform following steps to replace 12V trailer electrical connector at rear of cab.
1.
Remove two locknuts (6) and screws (7) from trailer electrical connector (8). Discard locknuts.
2.
Pull trailer electrical connector (8) outward from rear of cab for access to rear of connector.
8
6,7
3.
Disconnect wires of wiring harness (9) from rear of trailer electrical connector (8) in accordance with instructions
in WP 0120 00.
8
9
4.
Connect wires of wiring harness (9) to rear of trailer electrical connector (8) (WP 0120 00).
5.
Position trailer electrical connector (8) to rear of cab.
6.
Install trailer electrical connector (8) to cab with two screws (7) and new locknuts (6).
7.
Place battery disconnect switch in ON position.
8.
Lower cab (TM 9-2320-312-10).
END OF WORK PACKAGE
Change 1
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals