Click here to make tpub.com your Home Page

Page Title: PRIMARY FUEL FILTER ELEMENT INSTALLATION
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

TM 9-2320-312-24-1
FUEL/WATER SEPARATOR MAINTENANCE - CONTINUED
0018 00
PRIMARY FUEL FILTER ELEMENT INSTALLATION
1.
Clean sediment bowl (12) with a clean rag. Inspect bowl for cracks, breaks or damaged threads.
2.
Install new gasket (11) and plug (13), if removed, on sediment bowl (12).
3.
Install sediment bowl (12) to new filter element (10).
CAUTION
DO NOT fill fuel filter with fuel before installing. Fuel would not be filtered and could be contami-
nated. Contaminated fuel will cause accelerated wear to fuel system parts.
 DO NOT use a strap wrench to tighten filter element. Overtightening will damage filter element and
cause fuel leaks.
4.
Install filter element (10) on filter adapter (9) until filter element sealing surface contacts adapter.
5.
Turn filter element (10) an additional full turn.
6.
Place battery disconnect switch in ON position.
CAUTION
DO NOT loosen fuel lines at fuel manifold when priming fuel system. Engine components may be damaged
and/or loss of priming pressure may occur when fuel lines are loosened.
7.
Prime fuel system (TM 9-2320-312-10).
8.
Start engine (TM 9-2320-312-10) and check for leaks.
END OF WORK PACKAGE
0018 00-5/6 Blank

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business