|
| |
TM 9-2320-304-14&P
5-237
Direct Support and General Support Maintenance (Cont)
NOTE
·
Right and left rear mounting
brackets are installed the same way.
Right side shown.
·
Right and left composite light
brackets are installed the same way.
Right side shown.
(53) Install two screws (80), locknuts (81),
and rear mounting bracket (82) on
right-side frame rail (2) and rear
crossmember (76).
(54) Repeat step (53) for left side of truck.
(55) Remove lifting device from rear roller bracket (67).
(56) Install right composite light bracket (83) on right-side frame rail (2) with two screws (84) and
locknuts (85).
(57) Install rubber grommet (86) in right-side frame rail (2) beside right composite light bracket (83).
(58) Repeat steps (56) and (60) for left composite light bracket.
(59) Adjust short strut as shown in b. Adjustment.
(60) Install right long strut
support bracket (87) with
five screws (88) and
nuts (89). Tighten nuts.
(61) Install left long strut
support bracket (90) on
left-side frame rail (4) with
four screws (91) and
nuts (92). Tighten nuts.
(62) Install rear ladder
bracket (93), screw (91),
and nut (92). Tighten nuts.
(63) Install cross support
brace (94) on right strut
support bracket (87) and
left strut support
bracket (90) with four
screws (95) and nuts (96).
Tighten nuts.
Change 1
|
