|
| |
TM 9-2320-304-14&P
5-208
Direct Support and General Support Maintenance (Cont)
5-39. LOAD HANDLING SYSTEM (LHS) MAIN FRAME CYLINDER MANIFOLD
REPAIR (CONT).
b. Disassembly.
CAUTION
·
Velocity fuse will fall out when
adapter is removed. Use care when
removing adapter, or damage to
equipment may result.
·
Velocity fuse will not work correctly
if installed backwards. Observe and
record direction of valve during
removal. Failure to comply may
result in damage to equipment.
NOTE
Tag and mark ports that velocity fuse,
relief valve, adapters, and plug are
removed from prior to disassembly.
(1) Remove three adapters (1), velocity
fuse (2), and hex head plug (3) from
main frame cylinder manifold (4).
(2) Remove three preformed packings (5)
from adapter (1). Discard preformed
packings.
(3) Remove preformed packing (6) from hex
head plug (3). Discard preformed
packing.
(4) Remove two relief valves (7) from main
frame cylinder manifold (4).
(5) Remove two backup rings (8), preformed
packings (9), and preformed packings
(10) from each relief valve (7). Discard
backup rings and preformed packings.
|
