|
| |
TM 9-2320-304-14&P
5-129
Direct Support and General Support Maintenance (Cont)
WARNING
Compression frame weighs 800 lbs. (363
kg). Attach suitable lifting device prior to
removal to prevent possible injury to
personnel.
NOTE
Left and right side screws are removed the
same way. Left side shown.
(3) Attach lifting device to compression
frame (5).
(4) Remove three front screws (8),
washers (9), 24 spring washers (10), and
three locknuts (11) from compression
frame (5) and truck. Discard spring
washers and locknuts.
(5) Remove three rear locknuts (12) and
screws (13) from compression frame (5)
and truck. Discard locknuts.
(6) Repeat Steps (4) through (5) for right
side.
(7) Using lifting device, lift compression
frame (5) off truck.
(8) Remove eight compression frame
spacers (14).
(9) Remove lifting device from compression
frame (5).
b. Disassembly.
NOTE
Left and right side clamps are removed the
same way. Left side shown.
(1) Remove eight screws (1) and
lockwashers (2), sixteen washers (3),
four cover plates (4), and eight tube
clamp halves (5) from left side
compression frame tube (6). Discard
lockwashers.
|
