|
| |
TM 9-2320-304-14&P
2-33
Operating Instructions (Cont)
CAUTION
To avoid equipment damage, visually check that main frame cylinders do not complete full
retraction while operating at engine speeds above idle.
NOTE
Engine speed will require increasing and decreasing in the following steps.
(20) After flatrack/FRS contacts rear rollers (10), increase engine speed from 1500 to maximum rpm
until main frame cylinders (11) have nearly completed full retraction.
(21) Reduce engine speed to idle and continue loading until main frame cylinders (11) are fully
retracted.
NOTE
LHS OVER LOAD indicator will come on when main frame cylinders are fully retracted
and joystick is activated.
(22) Release joystick (7).
Change 1
|
