|
| |
Malfunction
Test or Inspection
Corrective Action
TM 9-2320-304-14&P
5-60
Direct Support and General Support Maintenance (Cont)
5-7. DIRECT/GENERAL SUPPORT TROUBLESHOOTING PROCEDURES (CONT).
Table 5-2. Direct Support/General Support Troubleshooting (CONT)
LOAD HANDLING SYSTEM (LHS)
9. LHS DOES NOT OPERATE OR OPERATES SLOWLY.
NOTE
Only remove center screw on engine side of LHS main junction box cover.
Step 1. Check operation of free flow solenoid valve manual push button.
If manual push button cannot be pushed in, replace free flow solenoid valve
(Para 5-34).
If manual push button can be pushed in, go to Step 2. of this Fault.
Step 2. Check pressure at main manifold, port TPP, with LHS in transit position and joystick held
in LOAD position.
If pressure is less than 1,725 psi (11 894 kPa) adjust and replace main manifold re-
lief valve (Para 5-33).
|
