|
| |
TM 9-2320-304-14&P
4-234.3
Organizational Maintenance Instructions (Cont)
d. Assembly.
NOTE
·
Perform step below if wire rope or
lock pin was removed.
·
There are two lock pins on container
guide. Left side is shown.
Install wire rope (1), swaging sleeves (2), and lock
pin (3) on container guide (4).
e. Installation.
NOTE
·
If CHU is in flatrack mode, perform
step (1). If CHU is in container
mode, perform step (2).
·
Installation of left-side and
right-side container guides is the
same. Left side is shown.
(1)
Install container guide (1) with pin (2)
and lock pin (3) on stow bracket (4).
(2)
Install container guide (1) on slider (5)
with two lock pins (6).
f. Follow-on Maintenance. Remove
wheel chocks (TM 9-2320-279-10).
END OF TASK
Change 1
|
