|
| |
TM 9-2320-304-14&P
4-191
Organizational Maintenance Instructions (Cont)
b. Installation.
NOTE
Both switches are installed onto cover the
same way.
(1) Install seal (1) and button (2) in cover
(3) with nut (4).
WARNING
Adhesives, solvents, and sealing
compounds can burn easily, give off
harmful vapors, and are harmful to skin
and clothing. To avoid injury or death,
keep away from open fire and use in
well-ventilated area. If adhesive, solvent,
or sealing compound gets on skin or
clothing, wash immediately with soap and
water.
(2) Apply adhesive to back of switch (5).
(3) Line up tabs in switch (5) and position
switch (5) on button (2).
CAUTION
Pressing down on, or rotating tab more
than required to lock tab, could break tab
and/or switch.
NOTE
Tab will only move a short distance.
(4) Press down and rotate lock tab (6)
counterclockwise on switch (5).
NOTE
·
Steps (5) and (6) are for right safe
lowering button only.
·
Steps (7) and (8) are for left safe
lowering button only.
(5) Install wire 1479 (7) on switch (8) and
tighten screw (9).
(6) Install wire 1477 (10) on switch (8) and
tighten screw (11).
|
