|
| |
TM 9-2320-304-14&P
2-82.141
Operating Instructions (Cont)
(20)
Using pin (11), turn adjustment collar (12)
until cam (9) is pushed positioned tight
against front of shoring slot (10).
NOTE
Outside hole is preferred in step (20). Pin
ensures that cam cannot be dislodged
during transit.
(21)
Insert pin (11) into one of the two holes in
cam securing block (13).
(22)
Insert hitch pin clip (14) into pin (11).
NOTE
If stack of CROPs is the load, repeat
Steps (18) through (22) on bottom CROP
and at least every other CROP in stack.
(23)
Close and secure ISO container doors.
b. Unloading.
(1)
Open ISO container doors (1) and secure
in open position.
(2)
Remove hitch-pin clip (2) and pin (3) from
cam securing block (4).
Change 1
|
