|
| |
TM 9-2320-304-14&P
5-274
Direct Support and General Support Maintenance (Cont)
5-43. CONTAINER HANDLING UNIT (CHU) KIT INSTALLATION (CONT).
(37) Position slider in container mode (Para 2-10.1).
(38) Raise LHS in AUTO mode approximately 18 in. (46 cm) (Para 2-9).
NOTE
·
Both rear container locks are installed the same way. Left side shown.
·
Lock handle is unlocked when facing front of slider.
(39) Turn lock handle (19) on left rear slider assembly (20) forward to unlocked position.
(40) Remove lock pin (21), pin (22), and rear container lock (23) from front lift adapter (24).
(41) Position rear container lock (23) in locked position on left rear slider assembly (20) and install
pin (22) and lock pin (21).
(42) Turn lock handle (19) on left rear slider assembly (20) back to locked position.
Change 1
|
