 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-303-24-2
AIR CONDITIONER COMPRESSOR REPLACEMENT - CONTINUED
0302 00
REMOVAL - CONTINUED
1.
Disconnect compressor clutch electrical lead (5) from engine harness (6).
CAUTION
Water and dirt can damage refrigerant system. Five minutes of not being capped is the limit for any hose or
component. DO NOT blow shop air through refrigerant hoses. Shop air is wet (humid).
NOTE
DO NOT disconnect refrigerant fittings using only one wrench. Hold one fitting in place using a wrench and
turn other fitting with a second wrench.
2.
Tag and disconnect two hoses (2) from top of compressor (4).
3.
Remove two preformed packings (3) and install protective plugs in hoses (2) and compressor fittings. Discard pre-
formed packings.
4.
Loosen two nuts (26) and two jamnuts (11).
2
3
4
5
6
1
29
30
7
11
8
28
10
27
9
25 26
14
13
11
22
15
12
24
21
16
20
23
19
17
18
5.
Allow compressor (4) to tilt and remove compressor drive belt (1) from pulley of compressor.
0302 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals