 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-303-24-2
EQUALIZING BEAM REPLACEMENT - CONTINUED
0287 00
INSTALLATION
NOTE
Steps 8 and 9 are for forward-rear axle.
8.
Reposition floor jack from step 5 of removal and install two spider assemblies (12), 16 washers (6), 16 screws (7), 16
washers (8), and 16 nuts (9) on both sides of forward-rear axle (2). Tighten nuts to 150-175 lb-ft (203.4-237.3 Nm) in
sequence shown.
9.
Install four air hoses (11) in brake chambers (10).
10.
Repeat steps 8 and 9 for rear axle (5).
10
6,7,8,9
11
2,5
12
11.
Install rear brakeshoe and linings (WP 0124 00).
END OF WORK PACKAGE
0287 00-5/6 blank
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals