 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-303-24-2
FRONT SPRING REPLACEMENT - CONTINUED
0282 00
INSTALLATION - CONTINUED
6.
Align grooves in pin (10) with holes in two shackles (6) and check end play. End play should be no more than 1/32 in
(0.8 mm). Add shims (9) to correct end play. If possible, add same number of shims on each side of pin.
7.
Install four washers (5), two screws (7), two nuts (4), and grease fitting (11).
CAUTION
Incorrect installation of axle stop will cause damage to axle and frame during use.
8.
Install axle stop (16) in position noted during removal. Install two U-bolts (2), four washers (14), and nuts (13). Tighten
nuts to 380-460 lb-ft (515-624 Nm).
9.
If removed, install stop cushion (17) in axle stop (16) (WP 0119 00).
3
1
45
2
6
5
7
6
5
8
9
4
5
17
11 10
16
15
8
14
12
13
5
7
9
10.
Install front wheel (TM 9-2320-303-10).
END OF WORK PACKAGE
0282 00-4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals