RAMP REPLACEMENT

TM 9-2320-303-24-2

RAMP REPLACEMENT

0271 00

THIS WORK PACKAGE COVERS

Removal, Installation

INITIAL SETUP

Materials/Parts

Maintenance Level

Nut, lock (P/N M45913/1-8CG5C) (6)

Direct Support

Nut, lock (P/N M45913/1-10CG5C) (6)

Tools and Special Tools

Tool kit, general mechanic's (Item 102, WP 0313

WARNING

Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-

dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of

heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to

personnel.

REMOVAL

NOTE

Perform steps 1 through 4 to remove each of two ramps.

Vehicle may utilize huckbolts instead of screws and locknuts. Replace all loose or damaged huckbolts

with grade 8 screws and locknuts.