 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-303-24-1
REAR VIEW MIRROR REPLACEMENT - CONTINUED
0197 00
REMOVAL
1.
Remove nut (11), two lockwashers (10), and spotter mirror (9). Discard lockwashers.
2.
Remove tiedown straps (18) securing wiring harness (19).
3.
Disconnect wiring harness connector (13) from mirror harness connector (12).
4.
Remove cap nut (21), washer (14), screw (16), and washer (15) from mirror (8).
5.
Remove locknut (25), washer (24), screw (22), and washer (23) from mirror (8). Discard locknut.
6.
Remove three locknuts (17), washers (20), socket head screws (28), washers (27), and spacers (26) from mirror (8). Dis-
card locknuts.
7.
Remove four locknuts (1), washers (2), screws (4), washers (3), and support (5) from door. Discard locknuts.
8.
Remove two cap nuts (6), three lockwashers (7), and mirror (8) from support (5). Discard lockwashers.
2
1
3
4
6
5
7
27
28
26
8
19
27
9
20
18
26
25
24
23
17
22
16
7
15
10
6
11
21
14 13
12
402-486
INSTALLATION
1.
Install mirror (8) on support (5) with three new lockwashers (7) and two cap nuts (6).
2.
Install support (5) on door with four washers (3), screws (4), washers (2), and new locknuts (1).
3.
Install three spacers (26), washers (27), socket head screws (28), washers (20), and new locknuts (17) on mirror (8).
4.
Install washer (23), screw (22), washer (24), and new locknut (25) on mirror (8).
5.
Install washer (15), screw (16), washer (14), and cap nut (21) on mirror (8).
6.
Connect wiring harness connector (13) to mirror harness connector (12).
7.
Secure wiring harness (19) using tiedown straps (18).
8.
Install spotter mirror (9), two new lockwashers (10), and nut (11).
END OF WORK PACKAGE
0197 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals