 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-303-24-1
REAR AIR BRAKE CHAMBER REPLACEMENT - CONTINUED
0140 00
INSTALLATION - CONTINUED
NOTE
Brake chamber is mounted in upper part of figure 8 hole.
3.
Install brake chamber (9) so that service brake fitting (4) and spring brake fitting (7) are accessible.
4.
Install two washers (2) and new locknuts (1).
5.
If service brake fitting (4) and spring brake fitting (7) are not properly aligned with hoses (5 and 6), loosen nut (8) and
rotate brake chamber (9) until fittings and hoses are aligned. Tighten nut.
6.
Connect brake chamber clevis (10) to slack adjuster (12) with two clevis pins (3) and new cotter pins (11).
7.
Connect service brake hose (5) and spring brake hose (6) to service brake fitting (4) and spring brake fitting (7).
8.
Uncage brakes (TM 9-2320-303-10).
9.
Start vehicle and build air pressure (TM 9-2320-303-10). Check for leaks.
END OF WORK PACKAGE
0140 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals