Click here to make tpub.com your Home Page

Page Title: REMOVAL - CONTINUED
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

TM 9-2320-303-24-1
FRONT AIR BRAKE CHAMBER REPLACEMENT - CONTINUED
0139 00
REMOVAL - CONTINUED
1.
Disconnect air hose (1) from adapter (2) of air brake chamber (12).
2.
Remove adapter (2) from air brake chamber (12).
3.
Remove tiedown strap (4) from ABS wiring harness (3). Discard tiedown strap.
4.
Remove two cotter pins (10) and two clevis pins (8) connecting brake chamber clevis (7) to slack adjuster (9). Discard
cotter pins.
5.
Remove two nuts (5), washers (6), and air brake chamber (12) from mounting bracket (11).
2
3
1
4
12
5,6
11
7
10
8
9
INSTALLATION
1.
Install air brake chamber (12) to mounting bracket (11) with two washers (6) and nuts (5).
2.
Align brake chamber clevis (7) to slack adjuster (9) and install two clevis pins (8) and new cotter pins (10).
WARNING
Adhesives and sealing compounds can burn easily, can give off harmful vapors, and are harm-
ful to skin and clothing. To avoid injury or death, keep away from open fire and use in a well-
ventilated area. If adhesives or sealing compound contacts skin or clothing, wash immediately
with soap and water.
Ensure that all air lines and fittings are clear of debris and excess pipe sealing compound does
not enter air lines or fittings. Failure to follow this warning could result in injury to personnel
or damage to equipment.
3.
Lightly coat pipe threads of adapter (2) with pipe sealing compound and install adapter to air brake chamber (12).
0139 00-2

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business