 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-303-24-1
SLACK ADJUSTER ADJUSTMENT - CONTINUED
0128 00
ADJUSTMENT - CONTINUED
9.
Remove capscrew (14), spring (15), and pawl (16).
10.
Rotate wheel and tighten screw (13) until wheel will not rotate.
NOTE
A slight amount of drag will be felt during wheel rotation.
11.
Loosen screw (13) 1/4 turn and rotate wheel.
12.
Install pawl (16), spring (15), and capscrew (14). Tighten capscrew to 15-20 lb-ft (20-27 Nm).
13.
Using flat tip screwdriver, manually pull slack adjuster (12) in direction away from brake canister (11) while measuring
total distance of travel between slack adjuster and brake canister.
14.
If total distance of travel exceeds 1-3/4 in. (44.45 mm), or if total distance is not minimum of in. (12.7 mm), repeat
steps 9 through 13.
13
11
12
14,15,16
12
11
14,15,16
13
11
0.500
1.750
12
12
0.500
11
1.750
15.
Remove jack stands and lower vehicle (TM 9-2320-303-10).
END OF WORK PACKAGE
0128 00-3/(0128 00-4 blank)
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals