 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-303-24-1
REAR BRAKESHOE AND LINING REPLACEMENT - CONTINUED
0124 00
INSTALLATION
WARNING
Brakeshoe linings and inside drum friction surface must be free of all oil/grease and other contaminants
prior to assembly to ensure maximum braking capability. Oil/grease and other contaminants may compro-
mise braking that could lead to a serious accident resulting in injury and/or death.
1.
Apply thin film of antiseize compound to each anchor pins (10) and small diameter of two cam rollers (3 and 5).
2.
Install two anchor pins (10).
3.
Install upper brakeshoe (1) on upper anchor pin (10).
4.
Install lower brakeshoe (6) on lower anchor pin (10).
5.
Install retaining spring (8) on anchor pin side.
1
8
9
3
5
10
6
6.
Rotate lower brakeshoe (6) toward S-cam (9).
7.
Install return spring (8) between upper and lower brakeshoes (1 and 6) on S-cam side.
1
8
9
6
0124 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals