 |
|||
|
|
|||
|
Page Title:
FRONT WHEEL LUG NUTS INSTALLATION - CONTINUED |
|
||
| ||||||||||
|
|
 TM 9-2320-302-20-2
FRONT AND DUAL REAR WHEEL LUG NUT INSTALLATION - CONTINUED
0206 00
FRONT WHEEL LUG NUTS INSTALLATION - CONTINUED
4.
Using same tightening pattern, tighten each lug nut to 450-500 lb-ft (610-678 Nm).
5.
Using same tightening pattern, again tighten each lug nut to 450-500 lb-ft (610-678 Nm).
REAR WHEEL LUG NUTS INSTALLATION
WARNING
Whenever any lug nuts require tightening or a wheel has been removed and replaced, all lug nuts must be
tightened to required torque. Failure to follow this warning may result in serious injury to personnel or dam-
age to equipment.
NOTE
Tightening pattern is the same for all wheel assemblies.
After operating vehicle for 50-100 miles (80 to 160 km), again tighten lug nuts.
1.
Install a lug nut on each wheel stud and hand tighten until each nut is flush with face of chamfer on wheel.
2.
Rotate wheel half a turn to seat parts and hand tighten each wheel lug nut again.
3.
Tighten each wheel lug nut to 50 lb-ft (68 Nm) in accordance with tightening pattern.
4.
Using same tightening pattern, tighten each wheel lug nut to 450-500 lb-ft (610-678 Nm).
TIGHTENING PATTERN
5.
Using same tightening pattern, again tighten each wheel lug nut to 450-500 lb-ft (610-678 Nm).
END OF WORK PACKAGE
0206 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals