 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-302-20-2
FRONT ANTI-LOCK BRAKE SYSTEM (ABS) SOLENOID VALVE REPLACEMENT - CONTINUED
0204 00
REMOVAL - CONTINUED
2.
Disconnect three air lines (11) from ABS valve (1).
3.
Remove two screws (9), four washers (7), two locknuts (6), and ABS valve (1) from bracket (8). Discard locknuts.
NOTE
Do not perform next step unless bracket is damaged.
4.
Remove two bolts (3), four washers (4), two locknuts (10), and bracket (8) from frame (5). Discard locknuts.
3
4
1
11
4
6
5
7
10
8
7
9
2
INSTALLATION
NOTE
Do not perform next step unless bracket was removed.
1.
Position bracket (8) on frame (5) and install two bolts (3), four washers (4), and two new locknuts (10).
2.
Position ABS valve (1) on bracket (8) and install two screws (9), four washers (7), and two new locknuts (6).
3.
Connect three air lines (11) to ABS valve (1).
4.
Connect two electrical cables (2) to ABS valve (1).
5.
Start vehicle (TM 9-2320-302-10) to build air pressure and check for leaks.
END OF WORK PACKAGE
0204 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals