 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-302-20-2
FRONT QUICK-RELEASE VALVE REPLACEMENT - CONTINUED
0196 00
REMOVAL - CONTINUED
2.
Remove two locknuts (7), washers (6), screws (5), washers (4), and quick-release valve (1) from crossmember (3). Dis-
card locknuts.
3.
Remove three elbows (8) from quick-release valve (1).
3
4
5
8
1
6
7
8
INSTALLATION
WARNING
Adhesives and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin
and clothing. To avoid injury or death, keep away from open fire and use in a well-ventilated area. If
adhesives or sealing compound contacts skin or clothing, wash immediately with soap and water.
Ensure all air lines and fittings are clear of debris and excess pipe sealing compound does not enter air
lines or fittings. Failure to follow this warning could result in injury to personnel or damage to equip-
ment.
1.
Lightly coat threads of three elbows (8) with pipe sealing compound. Install elbows in quick-release valve (1).
2.
Install quick-release valve (1) on crossmember (3) with two washers (4), screws (5), washers (6), and new locknuts (7).
3.
Connect three tubes (2) to quick-release valve (1).
4.
Start vehicle and build air pressure (TM 9-2320-302-10). Check for leaks.
0196 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals