 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-302-20-2
BATTERY CABLES REPLACEMENT (M915A3 NEW MODEL, M916A3, M917A2) - CONTINUED
0146 00
REMOVAL - CONTINUED
NOTE
Each terminal at bottom of master battery switch also has an equalizer cable attached.
6.
Remove four nuts (21), lockwashers (22), and four battery cables (2, 14, 24 and 25) from four screws (23) of master bat-
tery switch (20). Discard lockwashers.
NOTE
Remove all locknuts, washers, caps, clamps, and screws holding battery cables to vehicle.
7.
Remove battery cables (2 and 14) from vehicle.
2
21,22,23
14
20
25
24
NOTE
Two other cables and wire will remain attached to starter solenoid.
8.
At large terminal stud of starter solenoid (31), remove nut (29), washer (30), and battery cable (25).
NOTE
Three other cables and white wire will remain attached to starter.
9.
At large terminal stud of starter (32), remove nut (34), and battery cable (9).
10.
At terminal plate (26) at left side of engine, remove nut (27), washer (28), and battery ground cable (24) from stud.
11.
Remove battery cables (9, 24, and 25) with rubber hose (33) from vehicle as an assembly.
12.
Remove conduit from all battery cables and remove battery cables (9, 24, and 25) from rubber hose (33).
0146 00-4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals