Click here to make tpub.com your Home Page

Page Title: DRAINING - CONTINUED
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

TM 9-2320-302-20-2
DRAIN AND FILL COOLING SYSTEM - CONTINUED
0046 00
DRAINING - CONTINUED
2.
Open draincock (2) on lower radiator pipe (3). Allow antifreeze to drain.
3.
Remove plug (4) from thermostat housing (5). Allow antifreeze to drain.
4.
Close draincock (2) and install plug (4).
1
5
4
3
2
FILLING
1.
Fill radiator with antifreeze in accordance with WP 0022 00.
2.
Install radiator cap (1).
3.
Start engine and allow engine to reach operating temperature (TM 9-2320-302-10).
4.
Allow antifreeze to circulate through cooling system. Check for coolant leaks.
5.
Shut off engine and allow engine to cool.
WARNING
DO NOT remove radiator cap or drain antifreeze unless engine is cold. Remove radiator cap in two steps.
First, place a thick cloth over cap and slowly turn cap left to first stop. Pause and allow pressure to escape.
Turn cap further left until it can be removed. This is a pressurized cooling system and escaping steam, hot
water or coolant will cause serious burns.
6.
Remove cap (1) and check antifreeze level. Add antifreeze, if necessary, in accordance with WP 0022 00.
7.
Install cap (1).
END OF WORK PACKAGE
0046 00-2

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business