 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-302-20-2
FUEL PUMP REPLACEMENT - CONTINUED
0038 00
REMOVAL - CONTINUED
1.
Disconnect fuel inlet line (2).
2.
Disconnect fuel pump-to-secondary fuel filter line (5).
3.
Disconnect fuel pump-to-fuel water separator line (4).
4.
Remove elbow (3), adapter (6), tee (7), and adapter (8) from outlet port of fuel pump (1).
5.
Remove adapter (12) from inlet port of fuel pump (1).
6.
Remove three screws (13) securing fuel pump (1) to rear of air compressor (9).
7.
Remove fuel pump (1), drive coupling (11), and gasket (10). Discard gasket.
9
10
11
12
2
1
8
13
3
7
4
6
5
INSTALLATION
WARNING
DO NOT perform fuel system checks, inspections or maintenance while smoking or near fire, flames or
sparks. Fuel may ignite, causing injury or death to personnel or damage to equipment.
1.
Install drive coupling (11) and new gasket (10) to fuel pump (1).
2.
Position drive coupling (11) to drive hub of air compressor (9) and align mounting holes of fuel pump (1) with those of
air compressor.
3.
Seat fuel pump (1) squarely against air compressor (9) and install three screws (13). Tighten screws to 22-28 lb-ft (30-38
Nm).
4.
Install adapter (12) to inlet port of fuel pump (1).
0038 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals