KEY TO OPERATOR'S SEAT ADJUSTMENT CONTROLS

TM 9-2320-273-10

KEY TO OPERATOR'S SEAT ADJUSTMENT CONTROLS (Continued)

RIDE LEVEL INDICATOR (located inside left frame upright)

This device indicates when the seat preload is adjusted properly for your weight

using the ride level adjustment described in item 1 above. The tip of the in-

dicator will be flush with the edge of the frame when the preload is correct as

shown in the inset view in Figure 2-9.

FORE AND AFT SEAT ADJUSTMENT CONTROL

Pull out on the lever to move seat forward or backward to adjust for individual

leg length. The seat may be moved forward or back approximately six inches.

SEAT BELT ADJUSTMENT

WARNING

Use of seat belts while operating your

vehicle is mandatory as an aid in pre-

venting personal injury in event of an

accident.

Seat belts should be adjusted for a snug fit with

the buckle securely fastened to prevent injury

in event of accident. To adjust length of belt for

fit, slip the belt through the buckle until it fits

snugly with the other end of the seat belt

snapped into the buckle. To release press the

center of the buckle.

2-23