|
| |
TM 9-2320-270-10
Troubleshooting - Continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
ENGINE OVERHEATS (WATER TEMP Gage over 200°F) (93°C) - CONTINUED
Step 5. Check engine oil level on dipstick (6).
If oil level is not between L (low) anf F (full) marks, add proper
grade of oil to bring level to L mark with engine cold, or be-
tween L and F when engine is warm (see LO 9-2320-270-12).
Do not overfill.
Step 6. Check transmission oil level dipstick (7).
a. If oil level is not between ADD and FULL marks add
transmission oil (see LO 9-2320-270-1 2). If oil is above
full mark notify Organizational Maintenance.
b. If engine still overheats, notify Organizational Maintenance.
END OF PROCEDURE
3-11
|
