|
| |
TM 9-2320-270-10
Troubleshooting
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
ENGINE FAILS TO CRANK
Step 1. Check main transmission range selector lever (1) position.
If selector lever (1) is not in neutral (N), move it to neutral
(N) position and try to start engine.
Step 2. Check IGN START circuit breaker (2).
a. If circuit breaker is out reset and attempt to start engine.
b. If circuit breaker trips again notify Organizational
Maintenance.
Step 3. Check electrolyte level in each cell (3) of each battery (4)
a. If electrolyte is not above top of plate (5) in each cell, add
distilled water (item 3, Appendix D) to raise level to
bottom of ring (6).
b. If electrolyte level does not stay above plate (5), notify
Organizational Maintenance.
3-4
|
