|
| |
TM 9-2320-270-10
COUPLING AND UNCOUPLING - CONTINUED
7.Test coupling by moving M911 Truck Tractor slightly forward. This will put pressure
against kingpin (3). If not a good coupling, Pull out and hook primary and secondary lock
handles (5) and (6), and repeat steps 1 through 7.
8.Visually check the coupling.
Semitrailer Kingpin (3) must be in locks (7) in center of fifth wheel (4).
There must be no daylight between fifth wheel plate (8) and fifth wheel (4).
Kingpin (3) must not be hooked over front of fifth wheel (4).
Change 5
2-85
|
