Table 1-1. Leading Particulars (Cont)

TM 55-1740-200-14

Table 1-1. Leading Particulars (Cent)

Differential carrier:

Steering gear:

Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. Cam and gear

Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6.285 to l

Oil capacity . . . . . . . . . . . . . . . . . . . . . . . . . ...1.5 pints

Oil capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . ll pints

Relief valve:

n. TIRES.

Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..600 psi

Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11.00 x 20

m. FRONT AND REAR AXLES.

Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8ply

Inflation pressure . . . . . . . . . . . . . . . . . . . . . . . . . . .20 psi

Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Model 9

Tread . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. Diamond

SECTION Ill TEST EQUIPMENT, SPECIAL TOOLS, AND MATERIALS

1-75. SPECIAL TOOLS.

1-73. TEST EQUIPMENT.

1-74. The test equipment, other than common

1-76. There are no special tools required to perform the

automotive equipment, r e q u i r e d to perform the

maintenance procedures prescribed in this technical

manual.

manual are listed in table 1-2.

Table 1-2. Test Equipment

1-77. MATERIALS.

FIGURE

NOMENCLATURE

PART NUMBER

1-78. All consumable materials required to perform the

Flow Meter

maintenance procedures prescribed in this technical

Spring Tension Gage

manual are listed in table 1-3.