 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2420-224-34
HAMMER
DRILL
REPAIR
(CONT)
17.
REMOVE PISTON (32) from flow sleeve (33).
18.
REMOVE PIN (34) from valve body (35).
19. PLACE flow sleeve TUBE (27) with valve
BODY (35) down onto PIPE and REMOVER.
CAUTION
During step 20, cover flow
s l e e v e tube with suitable disc
to prevent damage to flow
s l e e v e tube.
Insert rag into pipe to
prevent damage to valve
body.
20.
U S I N G suitable PRESS, REMOVE valve
BODY (35), automatic valve (36), and flow
sleeve (33).
REMOVE four PINS (37) from flow sleeve
21.
(33).
REMOVE PIN (38) and two PINS (39) from
22.
valve body (35).
23.
REMOVE and DISCARD backup RING (40)
and PACKING (41) from flow sleeve tube
(27).
21-4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals