 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2420-224-34
BACKHOE BUCKET CYLINDER REPAIR (CONT)
11. INSTALL PISTON (16) on piston rod (6).
WARNING
Adhesive causes immediate
bonding on contact with eyes,
s k i n , or clothing and also gives
off harmful vapors. Wear
p r o t e c t i v e goggles and use in
w e l l - v e n t i l a t e d area. If adhesive
g e t s in eyes, try to keep eyes
o p e n ; flush eyes with water for
1 5 minutes and get immediate
m e d i c a l attention.
12. APPLY COAT of SEALING COMPOUND to
T H R E A D S of screw (18) and INSTALL
SCREW (18) and washer (19) in piston rod
( 6 ) . TIGHTEN SCREW to 475-525 Ib-ft
(644-712 N.m).
13. INSTALL piston ROD (6) in cylinder (3).
14. USING spanner WRENCH, THREAD GLAND
(9) into cylinder (3) and TIGHTEN to 100-200
Ib-ft (135-271 N.m). Each half of hole for
self-tapping screw must now be in alinement.
15. INSTALL self-tapping SCREW (20) in cylinder
(3).
NOTE
Follow-on Maintenance:
I n s t a l l backhoe bucket cylinder
(TM 5-2420-224-20).
20-118
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals