Section II. STARTER REPAIR

TM 5-2420-224-34

Section Il. STARTER REPAIR

STARTER

REPAIR

a. Disassembly b. Inspection c. Testing d. Assembly

This task covers:

References:

Tools and Special Equipment:

TM 5-2420-224-20

TOOl Kit, SC 5180-90-CL-N26

Shop Equipment, SC 5180-95-CL-B08

Equipment Condition:

Shop Equipment, SC 4910-95-CL-A01

Dowel (4), Appendix C, item 1

Condition Description

Reference

Flat Washer, 9/16 ID

Starter Solenoid Removed

TM 5-2420-224-20

Materials/Parts:

Screw (2)

Gasket

Washer, Lock

REMOVE two screws (1), end BELL (2), and gasket (3) from end bell (4). DISCARD SCREWS and

GASKET.

NOTE

Shims and washers may or may not be present. if present, note quantity of shims and

washers removed to aid in assembly.

REMOVE and DISCARD lock washer RING (5), SHIM(S) (6), and WASHER(S) (7) from armature (8).

REMOVE two nuts (9), two washers (10), and end BELL (4) from housing (11).

IF DAMAGED, REMOVE BUSHING (12) from end bell (4).